Your Cart is Empty

BFT - Pillar-B 800 (PAS 68)

Crash rated automatic rising bollard certified by an independent body according to standards PAS 68: 2010 MIRA (Simulation) for prestigious private driveways and sensitive public locations. 

  • Hydraulic automatic rising bollard.
  • Diameter: 275mm.
  • Raised height: 800mm. 
  • 10mm steel gauge.
  • Anthracite Grey or 340-grade Stainless Steel.
  • Supplied as a pre-wired ready to install 1 - 4 bollard system.

    • Use: Intensive 2,000 movements per day.
    • Rising time: 6.5 seconds.
    • Lowering time: 6.5 seconds.
    • Operating range: 25 lin mtrs (with remote control).
    • Lock: Fail-safe (lowers on a power cut) or Fail-secure (stays raised on a power cut).
    • Crown: Integrated 12 x LED lights and acoustic signal.
    • Compatible with the U-Link communication protocol.
    • Guarantee: 2 Years.

    Build your bespoke system:- SHOP ACCESSORIES

      • Need Installation? Please call or e-mail for a quotation.
      • Requires specialist installation to meet crash rating standard.
      • Foundation box: 1060mm x 480mm x 10mm gauge.
      • Depth required: 1310mm (includes 260mm for drainage).
      • Control panel: Maximum of 4 bollards in parallel on the same system.
      • Control panel requires independent 230V - 5amp power supply (for each panel).
      • Cable: Bollards pre-fitted with 9 mtrs of multicore cables.
      • Cable extension colours: White, Yellow, Green, Red, Pink (see product add-ons).
      • Suitable for flat or sloping ground.
      • All hard and soft surfaces.
      • High water table areas may experience slow water drain-off.
      • Not recommended for sites prone to regular flooding. 
      • Motor: AC Hydraulic.
      • Power supply: 230Vac 50Hz
      • Motor supply: 500W
      • IP 67 protection rating.
      • -30 C to + 60 C operating temperature.
      • Integrated heating element.
      • 20,000 joules impact resistance.
      • 250,000 joules break-in proof.
      • Made in Italy (BFT - Europe).
      • Mild steel components manufactured to BS1440.
      • All parts hot-dipped galvanised to BS EN ISO 1461 (2009).
      • Anthracite Grey RAL 7015 (10mm gauge steel wall).
      • 304-grade stainless steel (10mm gauge stainless steel wall).
      • 195kg overall product weight.
        • Supply Only: Built to order - delivery within 2 - 3 weeks.
        • (bulk orders) please allow an extra week for your bollards to be built.
        • Supply & Installation: Please call or e-mail for a quotation.
        • Free UK mainland delivery with 30-day returns or exchange.
        • (note) we will contact you on receipt of your order to discuss your system set up.