GL900 Lift Assist Telescopic Bollard

Our largest lift-assisted stainless steel telescopic bollard, designed and built for any high-security domestic driveway or commercial access control application to secure and protect vehicles, property, and buildings from an attempted theft or ram raid attack.

Specification

• 139mm diameter.
• 900mm raised height.
• 6kg pull up weight.
• 3mm gauge stainless steel wall.
• 7-pin push button top lock.
• 2 keys supplied per bollard (more keys can be ordered below).
• 316-grade brushed stainless steel finish.
• GL900 lift-assist bollard data sheet (PDF)

Guarantees 

• 30-day returns or exchange.
• 1-year manufacturer's guarantee.

• Designed for all residential and commercial high-security, access control applications.
• High-security, strength, and protection on your driveway for all vehicle types including 4x4's, vans, trailers, and caravans, etc.
• High level of resistance against an attempted ram raid attack.
• 70% less lifting and lowering weight.
• Easy to raise and lower requiring minimal manual effort.
• Inserted with a 7 pin push-button lock at the base of the bollard.
  
• Unique key & lock number allocated to your bollard(s).
• Keys can't be copied or the lock picked or drilled.
• Plastic cover plate to protect the lock.
• Fixed stainless steel lifting handle.
• Lockable in the raised and lowered position.
• Heavy-duty hinged lid to protect the bollard when lowered.
• Fully serviceable and replaceable components.
• Galvanised steel hinged cover plate.

Manufacture

• Represents the very best of British design and engineering.
• Hand-built to order here in the UK.
• 139mm diameter: 1250mm x 190mm x 3mm gauge galvanised steel outer casing.
• Mild steel components manufactured to BS1440.
• All parts hot-dipped galvanized to BS EN ISO 1461 (2009).
• 62kg overall product weight.

Maintenance

• To help keep the 7pin lock in tip-top condition, we recommend the regular use of our specially formulated lubricating lock oil.
• This will ensure the smooth operation of your bollard for many years to come.
• Keep the base of the bollard clear of dirt, debris, and leaves, etc.
• Cleaning the retractable inner bollard.

Ground Conditions

• Suitable for flat or sloping ground and any hard or soft surface.
• Not recommended for sites prone to regular deep water flooding. 
• Areas with a high water table may experience slower water dispersion.

DIY Installation

• Excavation depth required: 1400mm (includes 150mm for drainage). 
• Tools required - CAT scanner, stone cutting saw, concrete breaker, post borer, long-arm graft, shovel, spirit level, trowel, hand tools, and a wheelbarrow.
• Materials required - 20mm shingle, 10mm shingle, ballast, sharp sand, rapid set cement, cement dye (optional), mortar plasticiser, and water. 
• Approx time to install - 1-2 hours (per bollard).
• DIY installation guide (PDF)

We can install this heavy-duty bollard for £300 + vat (£360.00 inc vat).

• Price applies to the installation of a single bollard and includes the all-important cable avoidance scan (CAT scan), road tolls, fuel, alignment, excavation, installation, materials, surface reinstatement, and spoil removal from the site. 
• Your installer's vehicle is fully equipped and will carry the necessary tools to complete the work. Your installer will also provide their own electricity and water supply. 
• Discounts are available for multiple installations at the same location (see our 'Buy More - Save More' rates above).
• More details about our installation service

Ordering your installation(s)

• To have one of our experienced, fully insured operatives install your bollard(s) simply 'ADD INSTALLATION' to your order.
• You will then be allocated an installer, and your goods will be manufactured and delivered to you within the estimated delivery date shown above. 
• Once you receive your goods, simply contact your allocated installer to arrange an installation date that we guarantee will be carried out within the estimated installation date shown above.
• The postcode areas we cover